Pile driver rental and talk about how to deal with pile driver fever? How to save oil? Let's take a look.

Pile driver rental learned that pile drivers are not unfamiliar machines to everyone. Its appearance facilitates the outside staff, improves their work efficiency and shortens their working hours. Pile driver is a kind of pressure equipment. The pile driver adopts diesel power and full hydraulic mechanical transmission. It has the characteristics of light driving, high piling precision, durability, energy saving and environmental protection. Especially suitable for all kinds of engineering installation, maintenance and repair construction.

However, after the pile driver works for a long time, the pile hammer is particularly easy to heat up, which will cause damage to other parts. Sometimes, it will be unusually hot soon after starting work. Therefore, there must be corresponding solutions. Pile driver rental to talk about the following.

1. Under normal circumstances, it is necessary to zero the fuel pump of the pile driver, lift the piston, and empty it several times until the pile penetrates into the normal range, and the road pile driver starts to pile normally; in winter, diesel oil cannot be used for a summer, which will precipitate the internal wax of the diesel engine and block the oil pipe. You must remember not to use gasoline instead of diesel.

2. Then you need to remove the fuel pump pipe on the pile driver, and then drain the remaining water until you can see the diesel flowing out. The small pile driver exhausts the fuel pump, sets the fuel pump to zero gear, removes the oil cylinder locking screw, raises the landing gear and upper piston, and emptying several times. Then fit and lock the screws.

Pile driver rental said that in addition to the above two situations, attention should also be paid to daily use. In addition to regular and correct piling, attention should be paid to routine maintenance.

The following pile driver lease to introduce a few small ways to save fuel.

1. According to different construction conditions, choose the appropriate drill bit. In the process of piling up and down, the pile driver manufacturer can effectively save fuel consumption;

2. During use, the pressure range should be uniform and not overpressure, which can save fuel consumption, protect related components and improve work efficiency;

Another thing is to use good oil. A few tips to save fuel can not only play well, but also save fuel consumption. The viscosity of the hydraulic oil should be moderate, and the viscosity-temperature index of the oil should not be less than 90. A good hydraulic oil should have good hydrolytic stability.

4. Before the drill bit rises, the proper reversal of the drill bit can reduce the resistance, and the road pile driver also plays an effective role in disguise.

I believe that through the above introduction, we also have a lot of understanding of this aspect. We are a pile driver rental company. If you want to know more about this aspect, please contact us. We have a detailed understanding of this aspect and can help everyone know more. Welcome to contact.