KR125A Rotary Drilling Rig Qatar Offshore Construction-TYSIM RENTAL & SERVICE

Home
About Us
Rig Leasing
Used machine sales
Engineering
Bolg
Join us
Qualification

News Center

Home page

KR125A Rotary Drilling Rig Qatar Offshore Construction

Release time:

2021-07-29

This project is a Qatari seaside port project, with a drilling diameter of 600mm, the main construction stratum is limestone, with a depth of 11m, and the hole-forming time is 120 minutes. The rotary drilling rig is constructed on the floating bridge, which is not very stable. The drill bit uses the core barrel drill. Under the premise of meeting the construction requirements, KR125 rotary drilling rig, smart control, lightweight body, KR125 rotary drilling rig is very suitable for the construction of such projects.

Construction model: KR125A Construction stratum: limestone

Drilling diameter: 600mm drilling depth: 11m

KR125 rotary drilling rig construction

Qatar is an Arab country in western Asia, located on the Qatar Peninsula on the southwestern shore of the Persian Gulf, bordering the United Arab Emirates and Saudi Arabia. The coastline is 550 kilometers long. Qatar has a flat terrain, most of which is a desert covered with sand. The terrain is slightly higher near the west coast. There is a large area of exposed limestone from Zkriet to the south. Qatar's onshore oil is mainly stored in this area. In order to protect the ecology and reduce the destruction, the construction method adopts the construction of the whole casing.

KR125A rotary drilling rig is a special integral transportation rotary drilling rig for TYSIM Machinery, with a large drilling depth of 37 meters, a large drilling diameter of 1.3 meters and an output torque of 125kN.m. Its good handling performance has been widely praised by customers and has been exported to many countries.