Company News

News Center

KR125A Rotary Drilling Rig Jiangxi Hengfeng Modern Agricultural Service Housing Project


Release time:

2021-07-29

This project is located in Hengfeng County, Jiangxi Province. The construction stratum is sandy layer, red sandstone, soil layer 5 to 6 meters, and then red sandstone downward. The stratum is relatively hard. The construction of pick double-bottom sand bucket is adopted, and the construction efficiency is relatively fast. The drilling depth is 23m, and the hole forming time is about 60 minutes.

TYSIM Machinery KR125A Rotary Drilling Rig Construction Video: https://v.qq.com/x/page/a0566egeqwf.html

Construction model: KR125A Construction stratum: sandy layer, red sandstone

Drilling diameter: 1000mm drilling depth: 23m

This project is located in Hengfeng County, Jiangxi Province. The construction stratum is sandy layer, red sandstone, soil layer 5 to 6 meters, and then red sandstone downward. The stratum is relatively hard. The construction of pick double-bottom sand bucket is adopted, and the construction efficiency is relatively fast. The drilling depth is 23m, and the hole forming time is about 60 minutes.

 

A

 

Construction of KR125A rotary drilling rig

In the construction process, due to the KR125A hole is too fast, the follow-up reinforcement cage and perfusion is not in place, the drilling speed has slowed down.

 

A

 

Construction of KR125A rotary drilling rig

KR125A rotary drilling rig is a special integral transportation rotary drilling rig for TYSIM Machinery, with a large drilling depth of 37 meters, a large drilling diameter of 1.3 meters and an output torque of 125kN.m. Its good handling performance has been widely praised by customers and has been exported to many countries.

 

A

 

KR125A small rotary drilling rig construction